Best way to tilt a 2x12 cab back? And what about the head?

[BlockInlay]

There are a bunch of stands and options for tilting cabs...like this:

You could build something yourself from scrap ply and carpet remnants on the cheap to test it out.

Easy solution but I'd need to get comfortable with putting the head somewhere other than on top of the cab. Not the end of the world i suppose.

 

[Dexter Inferno]

Easy solution but I'd need to get comfortable with putting the head somewhere other than on top of the cab. Not the end of the world i suppose.

A bit longer speaker cable and that shouldn't be a problem.
Have had the same issue with my Victory btw.

 

[Tiltsta]

You need one of these.

http://www.quiklok.com/catalog/?p=productsMore&iProduct=510&sName=BS-625

The top tilted bit where the head goes can be adjusted for the angle of tilt. Not sure if the height adjustment of the head part would clear a vertical 2-12, but maybe the specs on the page would help with that.

 

[BlockInlay]

You need one of these.

http://www.quiklok.com/catalog/?p=productsMore&iProduct=510&sName=BS-625

The top tilted bit where the head goes can be adjusted for the angle of tilt. Not sure if the height adjustment of the head part would clear a vertical 2-12, but maybe the specs on the page would help with that.

That’s a nice design for sure. My amp head clocks in at a fat ass 45 or 50 lbs. I think that stand specs out around 85 lbs total. OTH this stand is on amazon prime so I could always just “demo” it

 

[Bob411]

Just looking at it, I wouldn't think you could put a 2x12 vertical on it. Can you live with your cab horizontal?

If you were handy, or know someone, you could replace this piece with something longer.