Modern Saint
Starve your Fear, Feed your Dream!
It started with the Pedalboard Metamorphosis....
https://markweinguitarlessons.com/forums/threads/pedalboard-metamorphosis.108091/
Finally got a chance to make the changes to my pedalboard (V3.0). Took about 16 hours of organizing, rewiring, building new cables and troubleshooting, What was added was the Wah and the One Control Triloop. The Triloop is being used to 1) bypass to the tuner as well as kills the sound if I need to; 2) the Wah is in the second loop to avoid tone suck when the wah is in bypass (no true bypass).
I plan to do a few more changes and that is to really take advantage of the Rockboard Mod 1. For starters, use points A (my designated input) and E (my designated output) for consistency on the board. May open box to add buffers to improve stability. Also trying to figure a way to use another pair (B/C or D) for looping in an off-board Volume pedal for swells. This would go just before the time effects and after the drives. I am thinking of using the Power Pin for my wireless so I do not need to use the AC supply. Just need to configure the Cioks power output for my wireless receiver.
Here is the signal flow
https://markweinguitarlessons.com/forums/threads/pedalboard-metamorphosis.108091/
Finally got a chance to make the changes to my pedalboard (V3.0). Took about 16 hours of organizing, rewiring, building new cables and troubleshooting, What was added was the Wah and the One Control Triloop. The Triloop is being used to 1) bypass to the tuner as well as kills the sound if I need to; 2) the Wah is in the second loop to avoid tone suck when the wah is in bypass (no true bypass).
I plan to do a few more changes and that is to really take advantage of the Rockboard Mod 1. For starters, use points A (my designated input) and E (my designated output) for consistency on the board. May open box to add buffers to improve stability. Also trying to figure a way to use another pair (B/C or D) for looping in an off-board Volume pedal for swells. This would go just before the time effects and after the drives. I am thinking of using the Power Pin for my wireless so I do not need to use the AC supply. Just need to configure the Cioks power output for my wireless receiver.
Here is the signal flow
Last edited: