Kerouac
weird musical dildo
Seems to come in two models, the Custom and the Colin Cripps (Big Wreck, Kathleen Edwards, Ryan Adams, Wailing Jennys) model.
Custom specs:
•Bernie amp approx. 20 Watts
•Two EL84 Output, EZ81 Rectifier, (2) ECC83 Preamp Tubes
•Custom “Bernie” has larger filter caps & is less bright "No bright cap" & little more clean headroom then CC amp.
•Custom made N/C Aluminium Chassis & plexi panel
•All hand-wired PTP circuit board & silver Teflon wire
•Each component selected for its quality, tone and construction
•All Caps used are NOS Philips Mustard & Paper in oil Military Spec.
•Custom designed & hand-made Heyboer Power and Output Transformers.
•Smooth cover option: Passport Blue, Gray or British Racing Green.
The "Cripps" edition:
•Bernie amp approx. 15 Watts
•Two EL84 Output, EZ81 Rectifier, (2) ECC83 Preamp Tubes
•Hand made Power and Output Transformers.
•Custom made N/C Aluminum Chassis & plexi panel
•All hand-wired PTP circuit board like the originals
•Each component selected for its authenticity, tone and construction
•All Caps used are Paper in oil mil. Spec. & Allen Bradley Carbon comp resistors.
•Speaker 1x10” Celestion V10 / Cab size 18”x 16”x9"
•Covering in blood red rexine cloth. (only)
Some clips:
A few more clips here: http://www.texamps.com/colin_cripps.php
This one would look mighty fine with the McFeely and the Tweedy
Custom specs:
•Bernie amp approx. 20 Watts
•Two EL84 Output, EZ81 Rectifier, (2) ECC83 Preamp Tubes
•Custom “Bernie” has larger filter caps & is less bright "No bright cap" & little more clean headroom then CC amp.
•Custom made N/C Aluminium Chassis & plexi panel
•All hand-wired PTP circuit board & silver Teflon wire
•Each component selected for its quality, tone and construction
•All Caps used are NOS Philips Mustard & Paper in oil Military Spec.
•Custom designed & hand-made Heyboer Power and Output Transformers.
•Smooth cover option: Passport Blue, Gray or British Racing Green.
The "Cripps" edition:
•Bernie amp approx. 15 Watts
•Two EL84 Output, EZ81 Rectifier, (2) ECC83 Preamp Tubes
•Hand made Power and Output Transformers.
•Custom made N/C Aluminum Chassis & plexi panel
•All hand-wired PTP circuit board like the originals
•Each component selected for its authenticity, tone and construction
•All Caps used are Paper in oil mil. Spec. & Allen Bradley Carbon comp resistors.
•Speaker 1x10” Celestion V10 / Cab size 18”x 16”x9"
•Covering in blood red rexine cloth. (only)
Some clips:
A few more clips here: http://www.texamps.com/colin_cripps.php
This one would look mighty fine with the McFeely and the Tweedy