Hot or Not? Enns Double Cut

Lerxst

spaghetti and blankets
bab97c_be1b37ca5a144e3ead0270999ceb3ebf~mv2_d_3744_5616_s_4_2.jpg

bab97c_683ac6a5d78f42a8abbb206fef932722~mv2_d_3164_2636_s_4_2.jpg

bab97c_1cb1256eee52448d8d5b89e6c7ab01ec~mv2_d_5466_3378_s_4_2.jpg
bab97c_8c822ca2310e43449cae0106e5c33390~mv2_d_3744_5616_s_4_2.jpg
bab97c_810c819054de43b39c8a7304c8fdc543~mv2_d_4032_3024_s_4_2.jpg



Scale length: 25.197"
Nut width: 1.693"
Nut material: Bone
Fretboard: Ebony
Fretboard Radius: 12"
Body: Mahogany
Top: Varies
Neck: Varies
Bridge pickup: Varies
Neck Pickup: Varies
Bridge: Hipshot fixed bridge
Tuners: Hipshot
Strap buttons: LOXX

https://www.ennsguitars.com/electric

 
It looks really nice. I like everything but the point on the bottom by the end pin. The finish and overall build both look really killer
 
I like this a lot....

I'm a little surprised that we have many more likes than dislikes considering that this is pretty much a PRS replica. The new Gibson DC only has an upper horn that "kinda" resembles a PRS and that guitar got a lot of hate. I'm betting if it didn't say Gibson on the headstock it would have gotten considerably more love. Too bad we couldn't have done a double-blind comparison.
 
I think the top would serve better as a coffee table in a hunting cabin.
Pickup rings are a no.
1vol/tone,no.
Tongue depressor inlays,no.
 
That top is OMFG good. And I like the body shape. Looks like what Alembic would do if they weren’t a bunch of burned out deadheads.
 
Beautiful guitar. Too bad they couldn't cut out the body straight and left a tag on the bottom...
 
<<<Looks like what Alembic would do if they weren’t a bunch of burned out deadheads.>>>>
If only it had Alembic stuff in it. As is, its too minimalist as far as wiring (for me).
 
Looks like something PRS would do...oh, wait.....PRS has been doing this for decades...

It's a gorgeous guitar but it's not like it hasn't already been done.
 
Back
Top