Uncategorized

A couple small steps tonight, but ones that you may find interesting.

I removed all 6 PRS saddles, and took apart the three allen screws holding the top plate (nickel plated brass) to the trem block (unplated brass), and drilled the six holes required to get the wiring for the piezo saddles through the bridge plate.


Here you can see that I tried to get the six holes as close to the block as possible. ...

From This thread Baimun's PRS + Piezo custom build Blog

Originally Posted by baimun

Okay, I've never done a blog before, so bear with me if I don't do this right the first time.

The origins of this project go back to my obsession with the Rory Gallagher strat... it was raw, relic'd and felt like your favorite pair of broken in blue jeans, holes in the knees and all. Most PRS guitars have fancy tops, smooth shiny finishes and are the furthest thing you can get from a well worn strat like that.

...